Connections of the Monitor
GOLDEN EAGLE
VGA Input
As standard the
HCM 1xx DB
of the
GOLDEN EAGLE
series is equipped with an analog graphic si-
gnal port, known as VGA port.
Connect your VGA graphic source using standard Sub-HD15 cables to the input ports at the rear of
the monitor.
This port accepts all common or uncommon analog graphic signals regarding his MultiFormat Mul-
tiSync capability. For supported formats check the chapter VGA Formats in the service section.
Ethernet IP Interface
The TAMUZ
GOLDEN EAGLE
series models may be equipped with a Ethernet IP port built-in at the
rear. All
GOLDEN EAGLE
series monitors are equipped with this IP addressable interface port to al-
low remote communication from a PC network, see MRC software.
The pin-out of the Ethernet RJ45 port is shown in following table:
The image above shows the RJ45 port. There are two standards used for ethernet cabling, TIA-568A
and TIA-568B. Both are usable for a network to control the TAMUZ monitors.
Pin
Function
Color Code 568A
Color Code 568B
1
Clear to send
2
Date send ready
3
Receive Data
4
Ground
5
Ground
6
Transmit Data
7
Data Termina Ready
8
Request to send
The IP port is standard at all
GOLDEN EAGLE
HCM 1xx
series monitors.
© 02.07 TAMUZ - LCD Video Monitors
HCM Series Broadcast Monitor
Page - 29 -
