TallyGenicom 2900 - Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 84

background image

Chapter 3: Printer Menus and the Control Panel

3–45

Print to EOF (End Of Form) Continued

If Print to EOF is ON:

The printer automatically prints to the end of the form then stops. The display
reads

Paper Out

, the alarm sounds, and the FAULT indicator illuminates. At

this point you can load the machine with more paper. After you load paper,
adjust the top-of-form location and make sure the paper is feeding correctly.
When you are ready, depress the

Clear

key to clear the fault condition, then

place the printer Online and continue printing.

If Print to EOF is OFF, you have two choices:
Choice 1:

Load a new supply of paper into the printer. After paper has been loaded, set
the correct top-of-form location and check for proper paper feed. When you
are ready, depress the Clear key to clear the fault condition, then place the
printer Online and continue printing.

The printer will start printing where it left off, which may cause improper form and print
location alignment.

Choice 2:

Depress the Enter key. The printer prints to the end of the current form, then
the display reads

Paper Out

and the FAULT Indicator illuminates. At this point

you may load more paper on the printer. After loading paper, set the correct
top-of-form location and check for proper paper feeding. When you are ready,
depress the Clear key to clear the fault condition, then place the printer Online
and continue printing.

The Paper Out Sensor will not work unless the Top-Of-Form location has been set prop-
erly.

Quick Access

This feature provides a way for the printer to position printed forms for quick
tear-off access. When Quick Access is enabled, the paper is moved to the tear
position by pressing the Enter key. If the printer is online and the current print
job is finished, pressing the Enter key will move the paper to the tear position
and the Quick Access Timeout will start. New print jobs will not start printing
until the timeout has expired and the paper has automatically moved to the
next available top of form. (This typically results in a blank form separating the
next-to-print form from the previously printed form.) Alternatively, the printer
may first be placed Offline before pressing the Enter key. Placing the printer
back online will align the paper as described above and printing will resume as
soon as data is received. The default option for the Quick Access parameter is

Disabled

. The distance that the paper is ejected is set with the Eject Distance

parameter (below). The delay interval between print jobs is set with the Eject
Delay parameter (below).

Eject Distance

The Eject Distance parameter allows you to select the distance at which the
paper ejects during a Quick Access operation. The units are in tenths of an
inch, from 0.0 to 25.5; the default is 12.2 inches.

Operator Menu

⇒

Forms

«
...
43
44
45
46
47
...
»

Содержание 2900 -





















































































Отзывы:

Нет отзывов

Похожие инструкции для 2900 -

Color imageCLASS MF8580Cdw

Бренд: Canon Страницы: 36

Color imageCLASS MF8580Cdw

Бренд: Canon Страницы: 20

Color imageCLASS MF8280Cw

Бренд: Canon Страницы: 24

Color imageCLASS MF8080Cw

Бренд: Canon Страницы: 39

Color imageCLASS MF8050Cn

Бренд: Canon Страницы: 32

Color imageCLASS LBP7660Cdn

Бренд: Canon Страницы: 2

Color imageCLASS 8180c

Бренд: Canon Страницы: 24

Бренд: Canon Страницы: 30

C3000 - MultiPASS Color Inkjet Printer

Бренд: Canon Страницы: 41

Color imageCLASS MF8170c

Бренд: Canon Страницы: 2

Color imageCLASS MF8170c

Бренд: Canon Страницы: 98

Color imageCLASS MF8170c

Бренд: Canon Страницы: 8

Color imageCLASS MF8080Cw

Бренд: Canon Страницы: 46

Color imageRUNNER LBP5360

Бренд: Canon Страницы: 3

Бренд: Xerox Страницы: 192

WorkCentre 5325

Бренд: Xerox Страницы: 160

WorkCentre 5016

Бренд: Xerox Страницы: 2

WorkCentre 490cx

Бренд: Xerox Страницы: 258

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды