TallyGenicom 2900 -, Руководство оператора

Страница: 22 / 84

2–22
Operator Manual
Figure 2 - 1. Inside Paper Inlet, visible when looking inside the printer cabinet.
Loading Paper for Standard Printing Mode
Step 1.
Turn off the printer using the power switch on the back, or toggle the "Online"
button on the Control Panel until the LCD shows "Offline".
Step 2.
Raise the printer lid and open the doors on both tractors.
Step 3.
Open the new box of paper. Remove the box top so that the paper can be
pulled out freely. Open the front of the printer cabinet and place the new box
of paper inside.
Step 4.
Feed the paper up through the paper inlet, as shown in figure 2-1, a little ways
past the tractors and through the gap between the top back of the printer and
the lid (Figure 2-2). It will flow out between the paper chains and fold into the
wire rack near the floor (Figure 2-3).
Step 5.
Place the left-side paper holes onto the left tractor pins and close the tractor
door.
Standard Printing Mode
Figure 2 - 2. Paper path past the lid.
Feed paper
between the
lid and the
top of the
printer.