TallyGenicom 2365, Руководство пользователя

Страница: 41 / 186

User guide The control panel
31
Online mode
After switching on, the printer is automatically set to online mode.
Only in this mode can it receive data from the computer.
`
Tear key (4): Activates the tear function when fanfold paper is
loaded, see Moving the paper to the tear position (page 41) .
If Load is displayed above this key, no paper is loaded in the
printer or the printer is in park position. In this case the display
switches between
Online and Load paper fromTrac1 . Press the
key to feed paper to the printing position.
`
Setup key: Sets the printer to setup mode.
`
Online key: Sets the printer to offline mode.
Offline mode
Only in this mode is it possible to perform step, line, or form feeds
from the control panel, see
Paper transport (page 40) ; however,
data cannot be received.
`
Park key (1): Clears the paper path with paper loaded and acti-
vates paper path quick selection.
`
Key (2): Short keypress: Microstep forward. Long keypress:
Continuous paper feed.
`
Key (3): Short keypress: Microstep reverse. Long keypress:
Continuous paper reverse feed up to the park position.
`
Load key (4): Displays that no paper is loaded in the printer or the
printer is in park position. In this case the display switches be-
tween
Online and Load paper fromTrac1 .
If paper is loaded: Loads paper from the selected paper source;
the display changes to
LF/FF
Short keypress: Line Feed ( LF ).
Long keypress: Form Feed ( FF ).
`
Setup key: Sets the printer to setup mode.
`
Online key: Sets the printer to online mode.
Online Trac1
Tear
Online
Setup
2 1 3 4