5 0
T S - 8 5 0 i A N D T S - 8 6 0 i U S E R G U I D E
APPENDIX A — OPTIONAL
CONFIGURATION METHODS
Configuring the TS-850i/TS-860i as an analog local extension
Once you have completed the procedures in
Installing the TS-850i/TS-860i
on page
7, you can configure the TS-850i/TS-860i as an analog local extension. The base
will support one extension. If multiple handsets are registered with the base, they
will share the extension. Calling the extension will ring all handsets, but only one
handset can be used at a time.
If the TS-850i/TS-860i is configured as an analog local extension, you must engage
Flash to hold, transfer and park calls; to answer call waiting and queued calls; and
to get an internal dial tone if direct line access is enabled. To engage Flash, press
the
R#
key on the TS-850i or the
key on the TS-860i for approximately two
seconds until you receive dial tone or connect to the other caller.
1. Connect the telephone cable from the Line port on the base to the E1–E8 jack
on the TalkSwitch unit.
2. If possible, connect the Ethernet cable from the WAN port on the base to a
LAN port on your router or Ethernet switch. This will prevent the “No IP
address” message from appearing.
3. Launch the TalkSwitch management software.
4. Select the
Local Extensions/Fax
page.
5. Click the
Add
button. The
Add User / Extension
window appears.
Содержание TS-860i
Страница 6: ......
Страница 9: ...E V E R Y C A L L C O U N T S 3 Handset front view TS 860i handset...
Страница 10: ...4 T S 8 5 0 i A N D T S 8 6 0 i U S E R G U I D E Handset side view TS 860i handset...
Страница 11: ...E V E R Y C A L L C O U N T S 5 Handset charger Base front view Base rear view TS 860i charger...