E V E R Y C A L L C O U N T S
5 9
•
HTTPS URL:
is the URL of the HTTP/HTTPS server where configuration and software files are located.
Select the
Received by DHCP on boot
checkbox if the phone will use the DHCP Option defined to retrieve
the URL. If the option is present, the provisioning type is changed automatically to HTTP/HTTPS using
the URL from the DHCP option and default option 160. Note: Port 80 is used for HTTP and 443 for
HTTPS.
•
ID:
If required, enter the user name for HTTPS authentication.
•
Password:
If required, enter the password for HTTPS authentication
•
MAC Cfg. Format:
Define the format of the MAC (phone specific) configuration filename.
$MAC
is
replaced with the MAC address of the phone and must be included as part of the file name or path to
the configuration file on the HTTP/HTTPS server.
•
Verifying Cert.:
Enables the verification of the Certificate of Authority (CA) on the HTTPS server.
When enabled, the phone checks the CA signature. When
Server name verification
is checked, the
phone checks whether the name of the server sending the CA is valid. When
Expiration
is checked, the
phone checks the certification expiration date.
•
Root CA:
Defines a Certificate of Authority (CA) other than the internal CAs, which include Versign®,
to use for verifying the CA from the server. When the CA is not available in the phone memory, paste
the Root CA in this area of web page.
•
File to Upgrade:
Select the
S/W
checkbox if the phone should check for new firmware files on bootup.
Select the
Configuration
checkbox if the phone should check and download during bootup. We
recommend you leave both enabled. If no new files are found, no changes are made.
•
Decryption Key:
If required, enter the hexadecimal key required to decrypt configuration files.
•
Smart Upgrade:
Enables periodic checks for new software on the provisioning server. Two methods of
smart upgrade are available; one checks the server at the interval in hours, the second checks daily at
the time specified in a 24-hour clock format. Select
enable
from the
Use Smart Upgrade
drop-down
menu, then select the method with the radial button and enter the interval or time as appropriate.
If the phone finds a new version of software during the smart upgrade, the phone either downloads the
file or displays the availability of the new version and awaits confirmation to download. To await
confirmation, select the
If discovered, confirm downloading
checkbox.
To modify the configuration:
•
Select the parameter and enter the new value or select the checkbox.
•
When complete, press the
Save
button.
If the
Received by DHCP on boot
box is checked and there is an address specified for TFTP or HTTPS, then it is
ignored since the server information retrieved from the DHCP server is used.
Changes made to the Upgrade section require a reboot of the phone.
