E V E R Y C A L L C O U N T S
3 5
SET TO DEFAULTS
If required, the phone configuration can be returned to the original factory default settings.
To default the configuration:
•
Press the
button, then select
6. Default
.
•
Press the
Yes
softkey to set the phone to factory defaults, or press
No
to cancel.
LOCK/UNLOCK CONFIG
If required, some of the critical configuration parameters can be locked to prevent accidental changes.
These include Network settings, SIP setting and Flexible key assignments.
To lock portions of the configuration:
•
Press the
button, then select
7. Lock/Unlock Config
.
•
Enter a password then press
OK
.
•
Confirm the password then press
OK
.
•
Store the password somewhere for future reference.
•
Once assigned, select
7. Lock/Unlock Config
to lock the config.
•
To unlock the config, press the
button, then select
7. Lock/
Unlock Config
.
•
Enter the password, then press
OK
.
Defaulting the phone requires a reboot. When you leave the menu (press the
Back
softkey), you will receive a reboot
notice. Press the
Yes
softkey to reboot the phone now. The configuration will not use default values until the phone
is rebooted. If looking to re-register the phone that has been preconfigured as an extension to a TalkSwitch system
on the same LAN, reboot the phone again by pressing the
button, then select
9. Reboot
. Press the Y
es
softkey to
reboot the phone.
Returning the phone to factory defaults deletes any previously customized settings.
