Area of Rescue Command Unit
Installation Guide
Model AOR-24 / Model AOR-32
Product Revision 2.0
Page
11
of
23
Rev. 3/8/2022
Copyright 2014-2022 Talk-A-Phone, LLC
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, bAlert, Scream Alert, WEBS, and WEBS Contact are registered trademarks of
Talk-A-Phone, LLC. All rights reserved. All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate
any approval, endorsement, sponsorship, or affiliation with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
17. Connecting Primary Power:
Once the appropriate low voltage field cabling terminations have been completed, connect the
primary power (120/240 VAC, 50-60Hz) to the internal power supply located in the lower-left of
the Command Unit internal compartment.
The
L
(Line) and
N
(Neutral) terminals are located on the lower-left corner of the internal power
supply (see photo below). The AC ground should be connected to the bottom grounding terminal
on the internal power supply.
WARNING:
Once the backup batteries are connected, power will be supplied to the
Command Unit. Verify all connections and take precautions from unintended
electrical shock at this time.
