TALARIA STING, Руководство пользователя

Страница: 27 / 31

www.aebikes.com.au
|
sales@aebikes.com.au
|
page 023
ITEM
ERROR CODES
(MX VERSION) ERROR CODES
(L1E VERSION)
DESCRIPTION ERROR ANALYSIS SOLUTIONS REMARKS
29 E29 000E0
Level 3 over
current error.
Short circuit in the
external circuit
causes this error.
Inspect and eliminate
the short circuit.
If you don't have the
professional tools, or you
can find the short circuit,
please send the bike to
the nearest dealer to
inspect and repair.
30 E30 000F0
Level 4 over
current error.
Short circuit in the
external circuit
causes
this error.
Inspect and eliminate
the short circuit.
If you don't have the
professional tools, or you
can find the short circuit,
please send the bike to
the nearest dealer to
inspect and repair.
31 E31 00100 Setting error.
It's caused by
any improper
operations during
the production.
Send the bike to the
nearest dealer to repair.
32 E33 00300
Controller phase wire
over current error.
Controller phase
wire current is
equal or greater
than the protection
value.
1. Turn off the bike, and
switch off the circuit
breaker. Then, check
the whether the motor
phase wire terminal got
loose, or broken. And
then, check whether
the motor outlet phase
sequence corresponds
to the U / V / W on the
controller. Finally, check
whether the magnetic
encoder output wire
corresponds to the
yellow, green and blue
wires on the harness
assy.
2. Check whether
anything stuck the rear
wheel.
If the solution cannot
solve the error, please
send the bike to the
nearest dealer to inspect
and repair.
33 E34 00400
Controller busbar
over current error.
Controller busbar
current is equal or
greater than the
protection value.
1. Turn off the bike, and
switch off the circuit
breaker. Then, check
the whether the motor
phase wire terminal got
loose, or broken. And
then, check whether
the motor outlet phase
sequence corresponds
to the U / V / W on the
controller. Finally, check
whether the magnetic
encoder output wire
corresponds to the
yellow, green and blue
wires on the harness
assy.
2. Check whether
anything stuck the rear
wheel.
If the solution cannot
solve the error, please
send the bike to the
nearest dealer to inspect
and repair.