TALARIA STING, Руководство пользователя

Страница: 14 / 31

www.aebikes.com.au
|
sales@aebikes.com.au
|
page 010
Charging and Charger Information
Illustration 7
7-1
Battery Pack Discharging Interface
7-2
Ventilative Valve
7-3 Battery Power Indicator
7-4 Activation Button
• Only charge the Talaria battery pack with the approved Talaria accessory charger. Any other unapproved
chargers may cause damages to the battery pack, and lead to serious hazards.
• Check the charger to make sure the input voltage marked on the charger is correct for the local power supply
voltage (AC 110V / AC 220V).
•
Caution: When you charge the battery pack, firstly please connect the DC input connector with the battery pack
charging interface. Then, connect the AC power cord with the power supply socket. Once the battery pack is
fully charged, please disconnect the AC power cord. Once the indicator is extinguished, disconnect the DC input
connector.
• When the battery pack is charging, the red indicator will twinkle. Once the battery pack is fully charged, the
green indicator will remain on. Usually, it will take about 4 hours to fully charge the battery pack.
• Once the battery pack is fully charged, the charging will shut down automatically. However, in consideration
of safety, we suggest you disconnect the AC power cord from the power supply socket within 6 hours after the
battery pack is fully charged.
• Unqualified or unskilled people should not disassemble the battery pack, as damage may be caused to the
battery pack leading to serious hazards.
• When the battery pack is inactive, you can activate it via the activation button on the battery pack or by
connecting the charger.
CAUTION .
• Please ensure children are not able to reach the battery pack while charging.
• Once the battery pack has finished discharging, it will have a high internal temperature. Please do not charge
the battery pack immediately. Before charging, it is suggested to cool down the battery pack in a well-ventilated
place for 30 minutes.
• We suggest allowing the battery pack to rest for 10 minutes before use, after being charged.
• Please ensure the battery pack is not covered while charging. The charger is designed for use in-doors, and the
charger should be used and stored in a dry, ventilated place.
• If there is a strange smell, the temperature becomes too high while charging, or another issue arises that prevents
the battery from being fully charged, please stop charging immediately and send the battery pack to the qualified
maintenance store for checking.