9. Operating Your Transmitter
Restore power to ceiling fan and test for
proper operation.
1.
" LO, MED, HI"
buttons:
These three buttons are used to set the fan
speed as follows:
LO
= Low speed
MED
= Medium speed
HI
= High speed
2.
"FAN OFF"
button:
This button turns the fan off.
3. The
"LIGHT/DIMMER"
button turns the
light ON or OFF and also controls the
brightness setting. Press and release the
button to turn the light ON or OFF. Press and
hold the button to set the desired brightness.
The light key has an auto-resume, it will
stay at the same brightness as the last time it
was turned off.
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans, etc.
NOTE
: Wait for fan to stop before changing
the setting of the slide switch.
Warm weather - (Forward) A downward
air flow creates a cooling effect as shown in
Figure 19. This allows you to set your air
conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown
in Figure 20. This allows you to set your
heating unit on a lower setting without
affecting your comfort.
The Reverse switch is located on the top of
the motor. Slide the switch to the Left for
warm weather operation. Slide the switch to
the Right for cool weather operation.
Figure 19
Figure 20
Figure 18
LIGHT / DIMMER
LO
MED
HI
FAN OFF
