Taktomat RT, Оригинальная инструкция по эксплуатации

Страница: 48 / 57

Original Operating Instructions
Page 48 Cylinder Cam Rotary Indexing Table RT and TT Version 1.0.3
7.4 Lubrication
7.4.1 Requirements for lubricants
General
To ensure safe operation and a long service life, it is necessary to lubricate the machine careful-
ly. The specified oil and grease must be applied to all lubrication points.
Carefully clean dirty lubrication points using a suitable agent and then lubricate them with new
lubricant. After lubrication, any excess lubricant must be removed and properly disposed of.
The oil and grease used must be silicone-free.
Lubricating oil
Use only lubricating oil compliant with DIN 51 517
Recommended gear oil: Mobil
– Mobilgear600XP460 (ISOVG460)
Lubricating grease
Use only lubricating grease compliant with DIN 51 825-KP 2K
Recommended lubricating grease: Mobil
– Mobilux EP2
Note:
Only use lithium soap - based grease for lubrication. The use of greases based on different ma-
terials causes gummy deposits, decomposes the grease and destroys its lubricating properties.
7.4.2 Lubricating the rotary indexing table Type RT400, RT500, RT630
Monthly maintenance
Staff: Qualified staff
Tools and accessories required
Grease gun with adapter
Lubricating grease: Mobil
– Mobilux EP2
Figure: Detail showing grease nipple
(1) Grease nipple

Apply grease to the grease nipple (1) using the grease gun.

Remove excess grease.