Taktomat RT, Оригинальная инструкция по эксплуатации

Страница: 13 / 57

Original Operating Instructions
Safety information
Version 1.0.3 Cylinder Cam Rotary Indexing Table RT and TT Page 13

Any add - on components must comply to the same appropriate declaration of conformity.

To ensure conformity to ATEX the cylinder cam rotary indexing table may not be used for
purposes other than those for which it has been selected and ordered.

For use under different potentially explosive environments other than EX II 2 G T4 (135°C)
please contact with TAKTOMAT GmbH.
The manufacturer shall not be liable for any damage resulting from such use. Intended
use also includes observance of all the information in these instructions.
3.4 Foreseeable misuse
Any use beyond or other than the intended use is regarded as misuse.
3.4.1 Guarantee conditions
Changes to the structure of the materials used in the machine, e.g. the drilling of additional
holes, can result in damage to the components. This is not regarded as intended use and may
lead to loss of warranty or liability claims as a consequence.
3.4.2 Directives, statutory provisions and standards
The following statutory provisions and standards were applied:
Machine Directive 2006/42/EC, Annex I
Low Voltage Directive 2006/96/EC
EMC Directive 2004/108/EC
ATEX 95 Directive 94/9/EC
3.5 Technical condition of the machine
Do not use the machine if it is not in sound condition technically. If the machine is used when it
is not in a sound condition technically, there is a risk of death or injury to staff and a risk of
damage to property.
3.5.1 Make no changes in the safety provisions
The manufacturer has made safety provisions. No liability will be accepted if the operator of the
machine makes any changes in the safety provisions without express permission.