Main Features
The vivid color of the internal structure can be
recognized easily from the far end in the beam
alignment procedure.
The color differs between a transmitter and a
receiver which helps easy installation and
checking.
Enables easy and accurate beam alignment.
(Sold separately)
Minimizes the damage caused by induced
lightning through wiring.
Vertically ±20°compared with previous version.
It may adapt to the slope installation flexibly
Enables better and clear view for easy beam
alignment.
Double modulated beams are designed to distinguish the true
beam signal from accidental or deliberate interference from
sunlight, car headlights and other artificial light sources.
This increases the reliability in the outdoor security system.
The beam power is 100 times of the minimum requirement.
The beam distance is 10 times of the described specification.
This high power beam also realizes the reliability against
the harsh conditions like fog, snow, heavy rain.
Thank you for purchasing this product.
Read this instruction manual before using the product to make sure that you use it correctly.
This product is designed to be installed into the housing (sold separately) for use. Make sure to install this product into the housing for use.
&
HF
AT
Upper and lower beam individually detects the objects and
issues a signal only by blocking each beam.
AT output : OR-gated by upper and lower beam.
HF output : AND-gated.
By synchronizing the timing of transmitting and receiving
beam, the stacking system will be more reliable.
PHOTOELECTRIC BEAM SENSOR
Instruction Manual
(1) ANTI-CRAWL DETECTION
(2) AT . HF SEPARATE OUTPUT
1
2
3
4
(3) SYNCHRONIZED HIGH POWER BEAM
(5) QUAD HIGH POWER BEAM
(6) ECOLOGY
(8) DUAL RING SIGHT
(9) TARGET COLOR
(10) INCREASED RANGE
ADJUSTMENT ALLOWANCE
(11) WIRELESS ALIGNMENT CHECKER
(12) LIGHTNING PROTECTION
30% less than current models. The low current
consumption reduces cabling costs.
(7) LOW CURRENT CONSUMPTION
(4) DOUBLE MODULATION
RoHS adapted - Environment friendly. Free from Lead,
Mercury, Cadmium, Hexavalent chromium, Polybrominated
biphenyl, Polybrominated diphenyl ether.
PXB-100ATC-KH: 330ft (100m)
This device is an opposed type photoelectric beam sensor that consists of
a photo transmitter that transmits infrared light, and a photo receiver
for the transmitted light, as shown in the illustration on the right.
The infrared light transmitted from the transmitter expands in a cone
shape, while the light beams enter the receiver.
The straight line that connects the transmitter with the receiver is the
detection line.
This model is designed to prevent a crawling intrusion to coverage area
by means of OR-gated detection in addition to AND-gated detection.
In order to ensure that the detection line has sufficient margin of
sensitivity, adjust the direction of the light beams before placing the
system into operation. Providing sufficient margin of sensitivity reduces
the occurrence of malfunction caused by dense fog, heavy rain, frost,
snow, and other such weather conditions.
Coverage of light beams
Detection line
Receiver
Transmitter
1
