background image

Option: Glass checker EG-2000

1.26

(32)

1.77

(45)

7.87

(200)

Knockout

Knockout

Knockout

2.92

(74.2)

2.62

(66.5)

5

2

(51)

0.47

(12)

0.17

(4.5)

0.17

(4.5)

0.47

(12)

1.14

(29)

R0.8

(R2.1)

R0.8

(R2.1)

φ

0.16

(

φ

4.2)

φ

0.16

(

φ

4.2)

3.29

(83.5)

2.63

(66.7)

Lock screw

Limited Warranty :

TAKEX products are warranted to be free from defects in material and workmanship for 12 months from original date of shipment. Our warranty does not cover 
damage or failure caused by natural disasters, abuse, misuse, abnormal usage, faulty installation, improper maintenance or any repairs other than those provided 
by TAKEX. All implied warranties with respect to TAKEX, including implied warranties for merchantability and implied warranties for fitness, are limited in 
duration to 12 months from original date of shipment. During the Warranty Period, TAKEX will repair or replace, at its sole option, free of charge, any defective 
parts returned prepaid. Please provide the model number of the products, original date of shipment and nature of difficulty being experienced. There will be 
charges rendered for product repairs made after our Warranty Period has expired.

No.05-991   1708

In Japan

Takex America Inc.

4/15 Howleys Road, Notting Hill,
VIC, 3168
Tel  : +61 (03) 9544-2477
Fax : +61 (03) 9543-2342

Takenaka Engineering Co., Ltd.

83-1, Gojo-sotokan, 
Higashino, Yamashina-ku, 
Kyoto 607-8156, Japan 
Tel  : 81-75-501-6651
Fax : 81-75-593-3816
http : // www. takex-eng. co. jp /

Takex Europe Ltd.

Takex House, Aviary Court, Wade Road,
Basingstoke, Hampshire. RG24 8PE, U.K.
Tel  : (+44) 01256-475555
Fax : (+44) 01256-466268
http : // www. takexeurope. com

In the U.S.

In the U.K.

In Australia

Takex America Inc.

151 San Zeno Way 
Sunnyvale,
CA 94086, U.S.A
Tel  : 408-747-0100
Fax : 408-734-1100
http : // www. takex. com

12

EXTERNAL DIMENSIONS 

  (Unit : mm)

Содержание GS-2000E









Отзывы: