More tips and adjustments
NOW THAT IT IS SET UP
1.
First double check that all of the bolts are tight and all the
fasteners and rope are in place.
2.
Next, you want to make sure there is even pressure on all 4
legs. Slightly lift one or two legs and set back down, repeat
with all the legs.
3.
Put the attaching clips on the rope hangers (as shown
below) to accept swings.
4.
To attach swings the rope needs a loop at the swing ends or
chain. Take a Swing swings have metal
8
hook attached to the
ends of its rope. Push the loop into the connector clip as shown
in the picture below.
5.
Please note that some wiggle movement is normal (as with
most portable equipment) and does not effect the stability of
the swing stand. Most of this will go away when there is weight
on the stand.
Now you are ready to hang a swing, but no swinging quite yet.
Please read the information on each swing, you may need to
adjust them.
Attach-
ing clip
on the
rope
Attach
a
swing
13
