-5-
5. Installation Instruction
1. Unpacking
Remove nails from lower part of wooden crate.
Lift up the upper potion of wooden crate.
Chair will be left on the skid.
2. Remove the pump cover.
1. Remove the screws and remove maintenance cover,
base cover left and right from main body.
2. Remove the oil plug with red tag from oil reservoir.
3. Plug the unit power supply plug in to the
suitable power supply outlet.
4. Turn on the main switch located on the left side
of base.
5. Keep depressing UP button of foot switch
until the seat is lifted up to the end.
6. Turn off the main switch
7. Unplug the unit power plug from power supply outlet.
5-1. Preparations for Installations
Nails
Nails
Oil Plug with Red Tag
Maintenance Cover
Base Cover(R)
Base Cover(R)
Oil Reservoir
Main Switch
Foot Switch
Note : Do not remove the unit from the pallet
until the unit fixing position is read
y.
Holding the Carriage Jig and place it at
planned location. Do not carry by holding
the body or basin.
5-2. Installation of the Carriage Jig
1. Fix the Jig
A
to the base.(M10 x 30)
2. Fix the Jig B bracket to the base.(M10 x 50)
3.
Attach the Jig B support bar to the
Jig B bracket.
4.
Attach the Jig B to the Jig B support bar
and tighten the nuts.(M16)
CAUTION
Do not turn on power during installation.
Base
1 Jig A
2 Jig B Bracket
4 Jig B
3 Jig B Support Bar
Screws
M10 x 30
Screws
M10 x 50