-8-
Check Valve
Flexible Pipe
Packing
Stop Valve
Water Supply
Hot Water Supply
Drain Hose
Vinyl
Drain Pipe
Elbow
Packing
The height of drain pipe should be less than 60mm.
C A U T I O N
1. Insert the elbow to the drain pipe from floor with seals.
2. Adjust the length of drain pipe(VU40), so that the
one end of drain pipe(VU40) may become on the
edge of the base, and connect to elbow with seals.
3. Connect the drain hose packing to the drain pipe(VU40).
4. Through the drain hose clamp to the drain hose, and
connect the drain hose to the drain hose packing.
•
The drain hose shall be free of dent.
•
Attach the drain hose so as not to be folded.
5. Fasten the screw of the drain hose clamp for
drain hose.
•
Tightening too hard may damage the drain hose.
Do not tighten too hard.
6. Cover the elbow part with the vinyl.
5-6. Drain Pipe Connection
5-7. Water and Hot Water Supply Line Connection
1. Install the stop valve to each supply pipe.
2. Bend each flexible pipe to a suitable angle for
connection.
Check the each connection for leaks.
3. Connect the each Check Valve to the each stop
valve with the flexible pipe.
Make sure all connection is surely fixed.
please confirmed the water does not leak.
Drain Pipe(VU40)
C A U T I O N
C A U T I O N
Elbow and drain pipe(VU40) are not included
with shipment. Please prepare it beforehand.
Do not tear up the vinyl which is covered the drain hose.
C A U T I O N
F.L.
F.L.
Drain Hose Packing
Drain pipe(VU40)
Stepped Section
Drain pipe(VU40)
Elbow
Less than 60mm
Drain Pipe
from Floor
Edge of Base Plate
Base Plate
Insert the drain hose packing
to the drain pipe(VU40) until
the stepped section hit to the
end of drain pipe(VU40).
Drain Hose
Base Plate
Edge of Base Plate
Vinyl
Drain pipe(VU40)
Drain Hose
Packing
Drain Hose Clamp
Drain Hose
Insert it in
this line
Match the center of the drain hose clamp
to this line of the drain hose.
Fastening