4
Precautions during chair rotation
Be sure to always lock (secure) chair rotation by using the rotation lock switch after rotating the
chair. Be especially careful of the position of a reclined customer, and the customer's body,
hands and feet when the backrest is reclined. Check that the safety of the customer is ensured
before rotating the chair. Always be sure that chair rotation is locked before moving the chair.
There is a danger of injury or damage if the chair rotates unexpectedly. Adjust the adjuster
under the step so that power cord is not caught or pulled, and that the chair does not tip over
even when stepping on the step.
Safety Precautions (Must be Obeyed)
WARNING
Procedures if a power outage occurs
Turn off the power switch and remove the power plug of this product from the outlet in order to
prevent unexpected operation when recovering from a power outage. Also turn off the power
switches of all devices connected to the service outlet and remove the power plugs of devices.
Be extremely careful if there is a power outage when the seat is in a high position such as for
shampooing as it is not possible to lower the chair. With help from another person or similar
measure, assist the customer in getting in and out of the chair in that position, being very careful
that the customer is not injured and the chair does not tip over.
CAUTION
Make sure that no feet or
hands, or other objects will be
pinched between the step and
floor when raising/lowering or
rotating the chair body.
Turn off the power switch after
you are finished using the
chair.
Immediately wipe off any
chemical solutions or water
that spills on the chair.
Chemical solutions can become a stain,
and their adhering to an electrical part can
cause faulty operation or short circuit.
Immediately wipe off any grime or other
foreign material that has adhered to the
chair by using a dry soft towel and so on.
Be extremely careful not to
mistake the switches when
operating.
The person operating the chair must pay
careful attention to the surrounding area
and give verbal warning before operating
the chair.
Check the surrounding area
before pressing the preset
switches (P1, P2, and P3) and
auto return switch of the chair.
The person operating the chair must pay
careful attention to the surrounding area
and give verbal warning before operating
the chair.
Never use a disinfectant with
strong metal corrosion
properties (such as povidone
iodine (iodine solution) or
sodium hypochlorite) or
similar solution when wiping
down the chair.
Doing so can result in a malfunction.
Do not strongly strike or rub
devices.
Doing so can result in tearing of covers
and similar damage, and faulty operation.
Be constantly careful of and
inspect for looseness, rattling,
tilting, vibration, noise,
temperature, odors and other
possible problems.
If you feel that something seems slightly
different or not normal, immediately stop
using the chair, unplug the power plug,
and contact Takara Belmont or its
distributors.
Содержание LUAR AB-MF
Страница 2: ......
