22
Be careful that the dryer or iron does not contact the legs or other body parts of the
user or customer when using the dryer/iron holder.
Always be sure to store the holder under the body after use so it does not interfere
with work.
Do not rotate the dryer/iron holder with a hand dryer or iron still inserted in the slot.
Doing so can damage the chair, and the heat can cause deformation or other
damage.
The dryer/iron holder can withstand a load of up to 50 N (50 kgf).
The power plug becomes hot and can result in fire if the power plug of a device using
a service outlet is not firmly plugged in or there is a looseness inside the outlet when
using the service outlet. Immediately stop using the device, turn off the device
power switch, and remove the power plug from the service outlet. Also, stop using
the chair, turn off the power, unplug the power plug, and contact Takara Belmont or its
distributors.
This chair is specially designed for commercial use in providing procedures and services of barber shops
and beauty salons. It can only be used by trained hairdressers and beauticians, or by staff under the
supervision of a trained hairdressers or beautician.
(9)
Dryer/Iron Holder
(AB-MFB)
Pull out the dryer/iron holder at the center of the body on the right side of the chair.
You can use this as a stand for a hand dryer or iron while working.
(10)
Service Outlets
This chair is equipped with service outlets (230-V AC 7 A)* on the right and left control
panels.
Total (right and left sides) current available for use is 7 A or less
when not operating the chair and 4 A or less when operating the
chair. The power switch (right control panel) is turned off if the
current available for use is exceeded. If this occurs, stop using
the connected device(s), and turn on the power switch again.
*
220-V AC (7 A), 240-V AC (7 A), 120-V AC (12 A), 110-V AC
(12 A)
Dryer/Iron holder
Iron slots
Dryer slot
Use Procedures
CAUTION
Service outlets
WARNING
Содержание LUAR AB-MF
Страница 2: ......
