background image

Cleaning of Each Part

Lightly wipe clean using a dry soft cloth.

Leather Parts

Plastic Parts

Wipe clean using a dry soft cloth.

If extremely dirty

If extremely dirty

Operating Parts

Metal Parts

WARNING

CAUTION

CAUTION

CARE AND MAINTENANCE

27

Clean this chair after use to maintain it in a clean state. Leaving dirt or grime on the chair 

can result in the formation of mold. Always be sure to unplug the power plug from the 

outlet when cleaning the chair.

Wipe clean with a soft cloth that has been 

dabbed with a neutral detergent diluted 

with water to approximately 10%. Then, 

wipe the area with a dry cloth.

To use a chair that has not been used for an extended period, clean before using and be sure to 

check that the chair operates safely without any error.

Wipe clean using a dry soft cloth.

Do not clean these parts with a wet cloth because they are readily 

affected by moisture and water. Wipe off all moisture immediately if 

any water gets on these parts. Water left on these parts will result in 

rust or malfunction of electronic parts.

 This chair is an electronic device. Do not sprinkle with water to clean 

it. Washing in such a manner can result in a malfunction or electric 

shock.

 Turn off the power switch and unplug the power plug before cleaning 

or wiping down the chair. Failure to do so can result in electric shock 

or fire. Also, movement of the chair while cleaning or wiping down 

can result in injury.

 Do not clean leather parts using a cleaner or bleach containing 

organic solvent or abrasive compounds. Such substances can cause 

the leather surface to deteriorate or dull the luster.

 If color from clothing, belt or similar item adheres to the leather, wipe 

off the stain as soon as possible by using a soft cloth that has been 

dabbed with a neutral detergent diluted with water to approximately 

10% in order to prevent the stain from soaking in due to the plasticizer. 

Then, wipe the area with a dry cloth.

Wipe clean with a soft cloth that has been 

dabbed with a neutral detergent diluted 

with water to approximately 10%. Then, 

wipe the area with a dry cloth.

 Do not use any of the following substances to clean the chair.

Thinner, alcohol, nail polish remover, volatile chemicals (such as

  gasoline or kerosene), acid or alkaline solutions, chlorinated cleaners,

  disinfectants that are highly corrosive to metal, povidone iodine

 (iodine solution), sodium hypochlorite, waxes containing abrasive

  compounds, sponges containing abrasive compounds and similar

  substances.

  Do not use brushes, scouring brushes or similar items when cleaning the

  chair. Using them will damage the chair or result in the inability to clean

  off the dirt or grime.

 The metal part and mechanical section of the chair have sharp portions.

  Be careful when cleaning the chair that your hands, fingers or other

  body parts are not injured.

Содержание LEGEND





































Отзывы: