Takara Belmont LEGEND, Руководство по эксплуатации

Страница: 31 / 36

Perform the following inspection procedures in order to ensure that the chair can be used safely.
• Daily Inspection Procedures
Inspection Item Inspection Procedures Recovery Procedures if there is a Problem
DAILY INSPECTION PROCEDURES
30
□
Turn off the power switch, and
wait approximately five seconds
before turning on the power switch
again. If the alarm still sounds, the
position detector might be faulty.
Stop using the chair, turn off the
power, unplug the power plug,
and contact your closest dealer or
Takara Belmont.
□
Check that none of the operating
switches are pressed. After
checking that there is no object on
top of the foot switch or other
things, turn off the power switch,
and wait approximately five
seconds before turning on the
power switch again. If the alarm
still sounds, one of the operating
switches might be faulty. Stop
using the chair, turn off the power,
unplug the power plug, and
contact your closest dealer or
Takara Belmont.
□
Perform the procedures indicated
in "1 Using the Preset Function"
under "How to Use" (p. 21). If
operation is still not normal, stop
using the chair, turn off the power,
unplug the power plug, and
contact your closest dealer or
Takara Belmont.
□
Perform the procedures indicated
in "2. Using the Auto-return
Function" under "How to Use"
(p. 22). If operation is still not
normal, it might not be possible to
safely get in and out of the chair.
Stop using the chair, turn off the
power, unplug the power plug, and
contact your closest dealer or
Takara Belmont.
□
Perform the procedures indicated
in "(2) Raising/Lowering the
Chair"under "How to Use" (p. 15).
If operation is still not normal, it
might not be possible to safely get
in and out of the chair. Stop using
the chair, turn off the power,
unplug the power plug, and
contact your closest dealer or
Takara Belmont.
□
Check that the chair
operates normally.
□
Turn on the power switch,
and check that a double
beep with one to four
pauses are not emitted
intermittently.
□
Check that, approximately
five seconds after turning
on the power switch, a
double beep with five
pauses are not emitted
intermittently.
□
Check that the chair
moves normally to the
preset positions by using
the preset switches.
□
Check that the chair
moves normally to the
initial position (position
for getting in or out of the
chair) by using the auto-
return switch.
□
Check that the chair raises
and lowers by using the
UP/DOWN switches and
foot switches of the chair.