background image

indicates information that, if ignored or applied incorrectly, may result in death 

or serious injury to the operator and others.

indicates information that, if ignored or applied incorrectly, may result in minor or 

moderate injury and property damage.

indicates other useful information for ensuring safety.

indicates a general action required of 

the user.

indicates prohibition of disassembly, repair, or 

modification.

indicates a general prohibited action.

CAUTION

 

NOTICE

WARNING

indicates a general caution, warning, 

or danger.

No disassembly

ڦ

The following information

ڦ

About the warning symbols

ڦ

Read before use

Before use, read the “Safety precautions” and “Precautions for use” carefully to ensure proper use.

2

General safety instructions

is intended for safe use of this product and to prevent injury and damage to you and others.
These instructions contain important safety information. Be sure to comply with them all.
We shall not be held responsible or liable to the user or any other person for any personal or 
property damage resulting from accidents that may occur owing to failure to comply with the “Safety 
precautions” or “Precautions for use.” Such physical or property damage shall be the responsibility 
and liability of those who failed to follow the safety instructions during use.
Read and understand the meanings of the following warning symbols before proceeding:

Stop use in case of a jam or 

                                      if something feels wrong.

Do not sit on the backrest with it reclined.

Do not recline or raise the backrest while performing service.

Avoid use with plating peeled off.

Do not use the product outside its intended purpose.

Do not move the chair with a person seated on it.

Safety precautions

(Be sure to observe them)

WARNING

When the plating on any part is peeled off, 

immediately contact Takara Belmont or the 

nearest dealer for maintenance parts. Continued 

use without repair may result in injury.

Do not move the chair with a person seated on 

it. Failure to comply may cause the equipment 

to topple over, resulting in damage to it and an 

accidental fall.

Do not sit on the backrest or apply excessive 

force thereon with it reclined. Failure to comply 

may result in damage or an accidental fall.

This product is designed to seat a person 

receiving a hair wash, haircut, and shaving. Use 

of the equipment for any unintended purpose may 

result in damage to the equipment or an accident.

Do not recline or raise the backrest while 

performing service. If the backrest is reclined 

especially during a haircut, injury may result from 

contact with the scissors.

In case of a jam or if something feels wrong, 

stop use immediately and contact us, or contact 

the dealer nearest you.

Содержание CLIPPER AY-CLIP





















Отзывы: