background image

Pull the reclining lever down in the 

direction indicated by the arrow and 

recline the backrest slowly with a hand 

on it.

1.

When reclining the backrest

Pull the reclining lever in the direction 

indicated by the arrow and raise the 

backrest slowly with a hand on it.

The reclining lever may be on the right 

or left side depending on the destination 

of delivery. 

(A right-side lever type is shown here.)

2.

When raising the backrest

16

Operating instructions

The backrest can be unlocked by operating the reclining lever. 

The backrest can be moved only while the reclining lever is pulled down in the direction 

indicated by the arrow.

Reclining lever

This product is commercial equipment dedicated for procedures or services at barbershops and beauty salons 
and shall be operated only by experienced barbers or hairdressers or personnel under their supervision.

CAUTION

Ū

Before a backrest reclining or raising operation, always ensure that there is no person 

or object around it. Collision with a person or object may cause damage to the 

equipment or result in personal injury.

Ū

When the reclining lever is moved slightly, the backrest will be ready for operation. Do 

not use more force than necessary for operation or attempt to reverse the operating 

direction. Failure to comply may result in malfunction.

Ū

Do not allow the customer to adjust the backrest angle. Adjustment while performing 

services or operation using more force than necessary may result in injury or damage 

to the equipment.

Ū

To prevent the backrest from moving abruptly, be sure to hold it with a hand on it.

WARNING

Ū

Before a chair height adjustment operation or a backrest reclining or raising operation, 

always ensure that there are no hands or fingers in any gap in the chair. Failure to 

comply may result in serious injury to the hand(s) or finger(s) pinched.

Ū

Do not recline or raise the backrest while performing services. If the backrest is 

reclined especially during a haircut, injury may result from contact with the scissors.

Ū

Recline or raise the customer slowly. Failure to comply may cause head injury to the 

customer due to collision with the shampoo bowl. Lying on or rising up from the 

backrest too fast may cause the chair to lose balance and topple over. Especially 

when its height is elevated, the chair may often become unstable and more prone to 

topple over. Use sufficient care.

Ū

Use care while performing services to prevent contact of the customer or any other 

person with the reclining lever or the foot pedal. If accidentally unlocked, the backrest 

may spring back up or otherwise abruptly move, causing the chair to lose balance and 

topple over. Especially when its height is elevated, the chair may often become 

unstable and more prone to topple over. Use sufficient care.

Reclining and raising the backrest

4

Содержание CLIPPER AY-CLIP





















Отзывы: