22
WARNING
Check before operating the product:
Guidelines for Daily Inspection
Be sure to execute daily inspection according to the following guidelines. Continued use without executing the
daily inspection may result in failure or accidents.
To use the product safely, be sure to execute the following inspections.
■Daily Inspection Items (Pre-Operation Check)
Inspection Item
Inspection Procedures
If the inspection result is unacceptable
□Check for any deformation,
breakage, or deterioration on
the power plug or the power cord.
□There is no deformation breakage or
deterioration on the power plug or
the power cord.
Check while the product is in operation:
(which is limited to the case that
there is no deformation breakage or
deterioration on the power plug or
the power cord)
□The power plug or the power cord may
be heated as it is deteriorated.
Check if the power plug or the power cord is
hot to the touch while the product is in use.
□Check if there is no breakage
or deterioration on exterior
parts.
Visually check the entire product and
check for any breakage or deterioration
of the exterior parts, etc.
□Check that the power switch
operates correctly and the
lamps on the control panel
illuminate.
There shall be no problem, such as jamming
of the power switch, when the switch is
operated. In addition, check that all of the
lamps illuminate right after turning on the
power switch.
There is a possibility of electrical shock or
burn injury due to fire or electrical leakage.
Since some parts must be replaced,
immediately stop using the equipment, turn
off the power switch, disconnect the power
plug, and immediately contact the nearest
dealer or our company directly.
Restrictions in bringing out the expected
functions of the product may result in
accidents (injuries including burns).
Immediately stop using the equipment, turn
off the power switch, disconnect the power
plug, and immediately contact the nearest
dealer or our company directly.
If the equipment is used with the power
switch functioning improperly, failures such
as unexpected shutdown of power during
operation may occur. Furthermore, in the
state that the lamps on the control panel do
not illuminate, the product may not be used
correctly because the setup state cannot be
confirmed. If this is the case, immediately
stop using the equipment, turn off the power
switch, disconnect the power plug, and
immediately contact the nearest dealer or
our company directly.
□Check for any cracks or
breakage on the heater.
□Check for any rattling in
the head unit.
□Check for any rattling pipes
in the extension unit.
Check the casters visually.
Raise the upper shaft when assembling
the equipment, and check that the two
fixing screws are not loose.
Check that the two screws fixing the
upper main unit and the extension pipe
are not loose when assembling the
equipment.
A crack or breakage may result in electrical
shock or a burn injury due to fire or electrical
leakage. Since the parts must be replaced,
immediately stop using the equipment, turn
off the power switch, disconnect the power
plug, and immediately contact the nearest
dealer or our company directly.
If the screws are loose, retighten. If rattling
cannot be rectified by retightening the
screws, contact the nearest dealer or our
company directly.
If the screws are loose retighten. If rattling
cannot be rectified by retightening the
screws, contact the nearest dealer or our
company directly.
