15
1
2
3
4
5
O p e r a t i o n Pr o c e d u r e s
Start/Stop button
Time setup button
Practice mode selection button
Set the respective parts of the Roller
Ball in the correct position.
If the parts of the main unit are not set in the correct
positions, the equipment will not operate correctly.
(See page 11.)
Changing the setup should be done
according to the hair condition of
the customer, chemicals used,
practice, etc.
Turn on the power switch.
Choose a mode.
Press the Start/Stop button.
Press the Start/Stop button to rotate the ring and to
initiate operation under the selected conditions
(temperature level, time, heating position).
At this time, the pilot lamp (condition indication)
will illuminate.
During Operation
During operation, the Start/Stop button illuminates,
the selected mode and the decimal point of time
indication blink at intervals of one second, and the
remaining time is displayed.
Press the mode selection button according to the
menu when executing a practice illuminates the mode
indicator chosen and displays the standard setup item
(temperature level, time, etc.). Check the setup.
When the power switch is pressed, all of the indicator
lamps will illuminate for one second, and then only
the practice mode lamp will blink, showing the state
of waiting for mode selection.
The heater is hot. Never touch the
heater even when it is not glowing.
Information
The head part of the product uses gears.
The sliding friction noise of the gears fluctuates
in terms of the tone quality and sound volume
of the products.
When the equipment is to be used anew for another
customer within five minutes after interrupting the
operation, there is no problem in selecting the desired
mode anew without changing any setups.
When the equipment is used after returning to the home
position, compete the following procedures:
1. With the equipment in the interrupted state, press and hold
the time setup ▽ button until the display time reaches 0.
2. Press the Start/Stop button twice.
Returning the equipment to the home position
for another new use during the
operation
