13
If the head of the customer is misaligned from the beginning of the operation, an alarm will sound about
three minutes after initiation of operation, and the error code will be displayed.
5cm
24c
m
12
cm
Approx.
S e tt i n g
Be sure to observe the correct directions for use to make the most of the performance of the roller
ball and to ensure comfortable use by the customer.
Correct Setting Position
Setting the Roller Ball in Correct Position
Approx. 12 cm to the top of the head from the roller
ball rotation fulcrum and approx. 24 cm from the
infrared temperature sensor window
(approx. 5 cm between the nape stop and the nape).
Position the nape stop 5 cm away from the customer's nape
and set it at the center of the nape.
Move the chair up or down according to the seating height
of the customer or move the roller ball main unit up or down
with the elevation pedal to adjust the height.
Be sure to use the both hands
to adjust the height.
Operation Procedures of the Product
If the customer feels sick while using the roller ball, immediately stop using the equipment.
The far infrared rays from the roller ball will not affect the human body at all, but the customer may feel sick
due to the heat if the customer is in poor health.
CAUTION
Materials of Cap Used
Use a polyethylene cap for perm, color and treatment mode operations.
By using a polyethylene cap, the hair can be heated efficiently to the set temperature, and the
infrared thermo sensor will measure and control the temperature of the hair.
Use the manual mode if the cap is not used or if a cap other than the polyethylene cap is used.
If the perm, color or treatment mode is selected, the temperature cannot be measured well with
the infrared thermo sensor, causing an error code (E0, E1) to appear on the display panel.
If an "error code" appears, follow the instructions on [P20].
Should the customer's body or clothing become jammed between the main unit and the ring
during operation, the rotation clutch mechanism of the ring will be initiated to prevent danger.
Safe Rotation Function of Ring
Use of a cap other than the polyethylene cap in perm, color, and
treatment mode may cause abnormal temperature rise.When using a
cap other than the polyethylene cap, use the manual mode.
Approx.
Approx.
( )
