Takara Belmont AB-BR Скачать руководство пользователя страница 33

Страница: 33 / 36

Daily Inspection

Inspection Item

Inspection Procedures

Recovery Procedures if there is a Problem

Daily Inspection Procedures

Perform the following inspection procedures in order to ensure that the chair can be used safely.

WARNING

Check that chair rotation can be

locked and unlocked by using

the rotation lock switch.

Perform the procedures indicated in "Rotating the Chair"

(p. 14). If the chair does not operate normally even after

performing these procedures, stop using the chair, turn off

the power, unplug the power plug, and contact your closest

dealer or Takara Belmont.

Perform the procedures indicated in "Raising/Lowering the

Legrest" (p. 18). If the chair does not operate normally

even after performing these procedures, stop using the

chair, turn off the power, unplug the power plug, and

contact your closest dealer or Takara Belmont.

Perform the procedures indicated in "Reclining/Raising the

Backrest" (p. 17). If the chair does not operate normally

even after performing these procedures, stop using the

chair, turn off the power, unplug the power plug, and

contact your closest dealer or Takara Belmont.

Perform the procedures indicated in "Raising/Lowering the

Chair" (p. 15). If the chair does not operate normally even

after performing these procedures, stop using the chair,

turn off the power, unplug the power plug, and contact

your closest dealer or Takara Belmont.

Perform the procedures indicated in "Using the auto-return

function" (p. 20). If the chair does not operate normally

even after performing these procedures, stop using the

chair, turn off the power, unplug the power plug, and

contact your closest dealer or Takara Belmont.

Perform the procedures indicated in "Using the preset

function" (p. 19). If the chair does not operate normally

even after performing these procedures, stop using the

chair, turn off the power, unplug the power plug, and

contact your closest dealer or Takara Belmont.

Check that none of the operating switches are pressed.

After checking that there is no object on top of the foot

control or similar problem, turn off the power switch, and

wait approximately five seconds before turning on the

power switch again. If the alarm still sounds, stop using the

chair, turn off the power, unplug the power plug, and

contact your closest dealer or Takara Belmont.

Turn off the power switch, and wait approximately five

seconds before turning on the power switch again. If the

alarm still sounds, stop using the chair, turn off the power,

unplug the power plug, and contact your closest dealer or

Takara Belmont.

Check that the chair legrest can

be raised and lowered by using

the legrest switch.

Check that the chair backrest can

be reclined and raised by using

the backrest switch.

Check that the chair raises and

lowers by using the UP/DOWN

switches.

Check that the chair moves normally

to the initial position (position for

getting in or out of the chair) by

using the auto-return switch.

Check that the chair moves

normally to the preset positions

by using the preset switches.

Check that, approximately five

seconds after turning on the

power switch, a double beep

with five pauses is not emitted

intermittently.

Turn on the power switch, and

check that a double beep with

one to three pauses are not

emitted intermittently.

Does the chair

operate normally?

Be sure to always perform daily inspection according to the following instructions.

Failure to perform daily inspection can result in injury or damage.

Содержание AB-BR





































Результаты поиска

Содержание AB-BR

Отзывы:

Похожие инструкции для AB-BR

Бренды по названию

Популярные бренды

Takara Belmont AB-BR, Руководство по эксплуатации

Результаты поиска

Содержание AB-BR

Отзывы:

Похожие инструкции для AB-BR

Бренды по названию

Популярные бренды