Cleaning Procedures
31
Clean this chair after use to maintain it in a clean state.
Leaving dirt or grime on the chair can result in the formation of mold.
Lightly wipe clean using a dry soft cloth.
Leather Parts
Plastic Parts
If extremely dirty
Wipe off any stain by using a soft cloth that has been dabbed with a neutral
detergent diluted with water to approximately 10%, wipe it with a damp cloth
and thoroughly wipe it dry.
Control Panels
Metal Parts
The metal and mechanical parts of the chair have sharp edges. Be careful when
cleaning the chair that your hands, fingers or other body parts are not injured.
Clean a chair that has not been used for an extended period before using again.
After cleaning, be sure to always check that the chair operates properly.
Cleaning of Each Part
Spray-type Hairstyling Products (Especially hard types)
WARNING
CAUTION
•Turn off the power switch and unplug the power plug before cleaning.
Failure to do so can result in electric shock or fire. Also, sudden movement
of the chair while cleaning can result in injury.
•Do not sprinkle with water to clean it. Washing in such a manner can result
in a malfunction or electric shock.
When using spray-type hairstyling products (especially hard types), check the entire chair to make sure that
none of the product is adhering to the exterior surface of the chair (including leather parts). Immediately
wipe off any hairstyling product that is adhering to the chair. Allowing such hairstyling product to remain
results in it becoming firmly adhered, leaving a feeling of roughness. Be especially careful of flat surfaces
(such as the plastic covers) as this roughness is considerably noticeable on flat surfaces.
* If hairstyling product has become firmly adhered:
Clean off any firmly adhered hair product by using ethanol. However, repeatedly cleaning off
product adhering to plastic covers and leather parts by using ethanol can cause the surface to
deteriorate, paint to peel, the luster to be lost, and cracking. To prevent this, immediately wiping
off any adhering hairstyling product is the best method to prevent any problems.
•Do not use any of the following substances to clean the chair.
Thinner, alcohol, nail polish remover, volatile chemicals (such as gasoline or kerosene), acid or
alkaline solutions, chlorinated cleaners, disinfectants that are highly corrosive to metal, povidone
iodine (iodine solution), sodium hypochlorite, waxes containing abrasive compounds, sponges
containing abrasive compounds and similar substances.
•Do not use brushes, scouring brushes or similar items when cleaning the chair. Using them will
damage the chair or result in the inability to clean off the dirt or grime.
•Do not clean leather parts using a cleaner or bleach containing organic solvent or abrasive
compounds. Such substances can cause the leather surface to deteriorate or dull the luster.
Wipe clean using a dry soft cloth.
Do not clean these parts with a wet cloth because they are readily affected by
moisture and water. Wipe off all moisture immediately if any water gets on these
parts. Water left on these parts will result in rust or malfunction of electronic parts.
