29
Aligning with the Yume Swing Bowl
This chair is equipped with a "Yume Swing Position Setting Function" in the chair base that detects
position in order to be able to properly align the positions of the Yume Swing bowl and chair rotation.
Slap
<Yume Swing Position>
The Yume Swing position consists of the two positions shown below.
Use these in alignment with the bowl set position.
Front power cord side
Front power cord side
For front-layout Yume Swing bowl
For front-layout Yume Swing bowl
For rear-layout Yume Swing bowl
For rear-layout Yume Swing bowl
143°
•Lock the chair at the Yume Swing position so that the Yume Swing position and the bowl are
aligned at the proper position, and check that the chair and bowl are properly aligned.
•Reposition the Yume Swing position to the proper position after moving the chair for cleaning or
similar reason because the position might become misaligned due to such movement.
•The Yume Swing position setting function has a simple lock for position detection. Always be
sure to fully lock it by using the rotation lock switch after aligning the position because the lock
can be released with only slight force.
30°
1
Release the rotation lock and rotate the chair.
2
Rotation becomes slightly heavy as you slowly rotate
the chair until it is near the Yume Swing bowl
position and you feel a slapping click.
3
After the chair is secured at the position in 2, you can
press a previously set preset switch to align the chair
and Yume Swing bowl at the proper position.
