manualshive.com logo in svg

Takagi T?KJr2?IN, Инструкция по установке и руководство пользователя, Страница: 5 / 56

Поделиться
Скачать
Takagi T?KJr2?IN Скачать руководство пользователя страница 5

5

  

Page

INTRODUCTION

• 

This manual provides information necessary for the installation, operation, and maintenance 

of the water heater.

• 

The model description is listed on the rating plate which is attached to the side panel of the 

water heater.

• 

Please read all installation instructions completely before installing this product.

• 

If you have any problems or questions regarding this equipment, consult the manufacturer or 

its local representative.

• 

This equipment is an on-demand, tankless water heater designed to efficiently supply endless 

hot water for your needs.

• 

The 110 Indoor (T-KJr2-IN), 310 Indoor (T-K4-IN), and 510 Indoor (T-D2-IN) models are only 

to be installed indoors (direct-vent convertible).  The 110 Outdoor (T-KJr2-OS), 310 Outdoor 

(T-K4-OS), and 510 Outdoor (T-D2-OS) models are only to be installed outdoors.

• 

The principle behind tankless water heaters is simple:

 

  *This diagram illustrates tankless water heater design concepts only and does not accurately 

       represent the water heater’s physical description.

1.  A hot water tap is turned on.

2.  Water enters the heater.

3.  The water flow sensor detects the water flow.

4.  The computer initiates the fan motor and sends a signal to the igniter to create an ignition spark.

5.  The gas ignites and flames appear within the burner chamber.

6.  Water circulates through the heat exchanger and then gets hot.

7.  Using thermistors to measure temperatures throughout the water heater, the computer modulates 

the gas and water valves to ensure proper output water temperature.

8.  When the tap is turned off, the unit shuts down.

Burners

Exhaust vent collar

Heat exchanger

Gas valves

Fan motor

Flow adjustment valve

Computer board

Thermistor

Cold water inlet

Hot water outlet

Gas inlet

Thermistor

Burners

Flow sensor

Introduction

Installation Manual

Содержание T?KJr2?IN

























































Отзывы:

Нет отзывов