TAJIMA TME, Руководство пользователя

Страница: 2 / 4

Option buttons (top middle).

COORD: To rotate the design. P and one blinking light is normal. Press STEP to change to 45
degree mode (two blinking lights). Press SET to make it stop blinking.

A.CHNG: To switch between automatic and manual color change.

A.STRT: To turn on automatic start after a color change.

FRAME: To allow frame to be moved manually during sewing.

D.SET: Press after you have chosen a new design, and have finished with options.
Edit buttons (bottom right)

NUMERIC KEYPAD 0-9: Manual color change immediately. Also to insert values.

STEP: To browse through menu options

C: Clear button.

MODE: To change a parameter.

ERASE: Used in the memory erase function

MRY: Memory Erase button; used in the erase-all function
Main menu list

N.SELECT : To show the current automatic color sequence

TAPE CODE : To show the loaded design

REPEAT
: To show the repeat settings

STITCH : To show the stitch count. Press C to reset the count.

REPEAT : To show the repeat settings

ERROR
: This menu is shown only when there is an error. Press RESET to clear.

ALL LIGHTS
: To show the current resize/scale setting.
Status lights

STOP P. : Lights up when your main shaft is at the STOP position, marked in RED on the
flywheel.

JUMP, STOP, END : Lights up when you are at a JUMP code, STOP code, or END code.
Bar switch and button (under table)

BAR SWITCH LEFT: Pull bar to the left to stop, or to go back one stitch

BAR SWITCH RIGHT: Pull bar to the right to start; same as the green buttons.

INCH BUTTON: Inching or Jog button. This is NOT an ATH button.
Frame move

ARROW KEYS: Cause the frame to move manually.