TAJIMA TEJT II -C, Руководство пользователя

Страница: 6 / 45

1-2
Changing procedure of the frame
1.
Turn OFF the power switch, or select sleep
mode
In case of TFMX-C/TEMX-C....................................................................
Turn OFF the power, or select sleep mode.
In case of TEJT II -C .................................................................................
Turn OFF the power.
2.
To change frame
From border frame to cap frame ............................................p.1-3
From border frame to tubular goods frame ............................p.1-7
From tubular goods frame to cap frame .................................p.1-9
From tubular goods frame to border frame ..........................p.1-12
From cap frame to tubular goods frame ...............................p.1-14
From cap frame to border frame ..........................................p.1-16
If you set the machine to sleep mode, later working will
become efficient (p.1-19).
Although it is not possible to operate the machine during
sleep mode, you can move the frame by hand. Therefore,
you can change frames without any problem.
Release of sleep mode
Press the sleep mode key.
Sleep mode key
Press for two or more seconds.
OFF
ON
After changing the frame, proceed to [Turn ON the power
switch, or release sleep mode] (p.1-19) and after.
LX03