TAJIMA NEO TEJTII-C, Руководство пользователя

Страница: 39 / 118

4-2
4. DATA SET MENU
Data input (FD)
Data input (FD)
Input design data from a floppy disk to the machine. The data of input design will be
set.
1.
Insert the floppy disk.
2.
Switch to “DATA MENU”.
3.
Select “FD”.
The black square that blinks on the
screen is the item to be selected.
4.
Reading of floppy disk
When the machine is reading design
data of a floppy disk, the screen as
shown in the illustration below will
appear.
5.
Selection of design data
When design data that exceeds
memory capacity is input, error code
“2BA” will be displayed.
2BA=> p.11-2
6.
Input
When inputting “*.TBF” data, data set
will be performed after pressing
[SET].
7.
Set needle bar steps.
When there is no “color change”
setting in the input design data, set
needle bar number(s) to needle bar
step(s).
Input of needle bar step=> p.5-2
JZ05
Data set means to make design data
possible to be embroidered.
***** EMB START ****
TAJIMA12.DST 1
0/ 1027
01/15: 23-456789A<D>
1
Data
***** DATA MENU ****
1 INPUT DATA PC
2.SELECT DATA
3.DELETE DATA
.
Frame
Position
1 INPUT DATA PC
.
***** DATA MENU ****
1 INPUT DATA FD
2.SELECT DATA
3.DELETE DATA
.
Set
FILE SEARCHING
**** SELECT DATA ***
01/23
BIRD.TBF
STITCH 10713 ST
MEMORY 180876 ST
Frame
Position
**** SELECT DATA ***
09/23
BELL.DST
STITCH 2451 ST
MEMORY 180876 ST
Set
***** EMB START ****
BELL.TBF 1
0/ 2451
01/04: 6B3 <D>
A
*** COLOR CHANGE ***
MODE AUTO
01/04: