TAJIMA NEO TEJTII-C, Руководство пользователя

Страница: 23 / 118

3-2
3. Basic operation
Starting and stopping the machine
Starting and stopping the machine
1. Power switch
The power switch is located on the power supply box.
2. Emergency stop switch
To stop the machine in an emergency, press the emergency stop switch. Pressing the
emergency stop switch will cause the main shaft to stop immediately.
To release the stop lock, turn the switch to the direction indicated by the arrow.
3. Start switch and stop switch
The start switch starts the machine and the stop switch stops the machine.
When starting the machine with the start switch kept to be pushed, the machine will
start with inching. When the start switch is released, the speed will become normal
speed.
Pressing the stop switch will cause the needle bar to stop at the fixed position.
JZ05
To turn ON the power again, turn
“OFF” the power switch first, and
after two to three seconds turn it
“ON”.
When releasing the emergency stop,
do not move the frame.
After releasing emergency stop,
activate ATH to return the main shaft
to the fixed position, and continue the
working.
Manual Thread Trimming => p.9-7
OFF
ON
Start Stop