Taiyo Electric FA-1000 Series, Руководство по настройке

Страница: 6 / 10

6
Unit Solder Diameter
8) V-Groove Unit
0.5mm 0.6/0.65mm 0.8mm 1.0mm 1.2mm 1.6mm
FA-1000VU-05 FA-1000VU-06 FA-1000VU-08 FA-1000VU-10 FA-1000VU-12 FA-1000VU-16
9) Solder-Receiving Tube
Robot 0.5mm 0.6/0.65mm 0.8mm 1.0mm 1.2mm 1.6mm
200mm square
(50cm)
FA-1000VTB-
05-200
FA-1000VTB-
06-200
FA-1000VTB-
08-200
FA-1000VTB-
10-200
FA-1000VTB-
12-200
FA-1000VTB-
16-200
300mm square
(65cm)
FA-1000VTB-
05-300
FA-1000VTB-
06-300
FA-1000VTB-
08-300
FA-1000VTB-
10-300
FA-1000VTB-
12-300
FA-1000VTB-
16-300
400mm square
(70cm)
FA-1000VTB-
05-400*
FA-1000VTB-
06-400*
FA-1000VTB-
08-400*
FA-1000VTB-
10-400*
FA-1000VTB-
12-400*
FA-1000VTB-
16-400*
10) Clog-Detection Unit
0.5mm 0.6/0.65mm 0.8mm 1.0mm 1.2mm 1.6mm
FA-1000FDB-05
Solder Nozzle Tube
f 0.5 (1 pc)
FA-1000FDB-06
Solder Nozzle Tube
f 0.6 (1 pc)
FA-1000FDB-10
Solder Nozzle Tube
f 0.8 (1 pc) , f 1.0 (1 pc)
FA-1000FDB-16
Solder Nozzle Tube
f 1.2 (1 pc), f 1.6(1 pc)
Desktop Soldering System
FA-1000 Guide to Module Selection
(FA-3000 series)
Model
Optional Functions
Memory Card Reader / Writer 1-5 V Analog Voltage Output
FA-1000 X X
FA-1000-S2 O O
FA-1000-S3 O X
FA-1000-S4 X O
FA-1000 is the product code of the Control
Unit only.
To use the FA-1000 Soldering System, you will
also need the Basic Units (see below) and a
robot.
Memory Card Reader / Writer and 1-5 V
Analog Voltage Output can be selected as
optional functions.
1. Control Unit 1) FA-1000
2. Basic Units
Data Logger (example)
Memory Card
(example)
Tip approaches targets obliquely.
Tip does not strike or mount terminals.
Without Diagonal Driver With Diagonal Driver
2) Soldering Unit
FA-1000SD
3) Solder Feeder Unit
FA-1000FD
7) Diagonal Driver (Optional)
FA-1000SL
4) Solder Reel Holder
FA-1000RH1
(for 4-Axis)
FA-1000RH
(for 3-Axis)
5) Air Blow Tip Cleaner
FA-1000CL
6) Brush Tip Cleaner (Optional)
FA-1000BC
Removes burnt flux residue which cannot be
removed by air blow.
FA-1000SL attaches to Soldering Unit
FA-1000SD.
Provided that the tip does not interfere
with components, you may choose the
shorter stroke, giving a shorter cycle
time.
*Tip not included.
* With 3-Axis robot, a 70cm tube must be used.
About Optional Functions
Memory Card Reader / Writer
You can save soldering configurations on memory cards.
Very useful to copy the data to other FA-1000 Control Units and also to backup.
1-5 V Analog Voltage Output
Tip temperature is output by 1-5 V analog voltage.
An off-the-shelf data logger would be helpful to monitor temperature control.
*Solder-Nozzle Tube included.