Select "Disabled" to disable CPU L2 Cache ECC Checking.
3.3.4 Quick Power On Self Test
Select "Enabled" to speed up time required to complete Power-On Self-Test.
3.3.5 Boot Sequence
This option allows user to assign boot sequence of the system. Available options are A, C, D, E, F,
CD-ROM, SCSI and LS120/ZIP.
3.3.6 Swap Floppy Drive
When enabled, physical drive A will be assigned to logical drive B, and physical drive B will be
assigned to logical drive A.
3.3.7 Boot Up Floppy Seek
The system will detect and verify operation of the floppy drive type .
3.3.8 Boot Up Numlock Status
The option allows the <NumLock> key to be activated after system boot up.
3.3.9 Gate A20 Option
This entry allows you to select how the gate A20 is handled. The gate A20 is a device used to
address memory above 1 Mbytes. Initially, the gate A20 was handled via a pin on the keyboard
(Normal). Today, while keyboards still provide this support, it is more common, and much faster, for
the system chipset (Fast; default) to provide support for gate A20.
3.3.10 Memory Parity / ECC Check
When Disabled, there will be no memory errors shown on the monitor for Memory parity SERR#
(NMI). When parity DRAM modules are used, select Parity or ECC (Error Checking and Correcting)
to correct 1 bit memory errors in the memory.
3.3.11 Typematic Rate Setting
Select "Enabled" to configure "Typematic Rate" and "Typematic Delay" functions.
3.3.12 Typematic Rate
Use this option to set the rate at which a character keeps repeating while you hold down a key.
3.3.13 Typematic Delay
Select "Enabled" to set the length of delay before key strokes to repeat. Available options are "250",
"500", "750", and "1000".
3.3.14 Security Option
You can select whether the password is required every time the system boots or only when you
enter the Setup. You can assign "Supervisor Password" and "User Password" in the main CMOS
Setup Utility Screen.
3.3.15 PCI/VGA Palette Snoop
Enable this option to correct screen color shifts, when there is a combination of VGA cards,
accelerator cards, or MPEG cards present.
3.3.16 OS Select for DRAM > 64MB
