Tait TB7300, Инструкция по установке и эксплуатации

Страница: 35 / 89

TB7300 Installation and Operation Manual Working with Base Stations from Your PC 35
© Tait Limited November 2016
4.2.5 Troubleshooting Connection Problems
If the attempt to connect to a base station failed, consider these possible
causes.
1. Your PC is part of your organization’s LAN and does not belong to
the same subnet as the base station. Give the PC a suitable IP address
and subnet mask as described in
“Connecting a Networked PC to a
Base Station” on page 33 .
2. You are attempting to connect to the wrong IP address. Check that
the IP address is correct.
3. The link to the base station is down. Use ping to check.
4. You may have to bypass the proxy in your organization’s LAN to
access the radio communications network. Ask your system
administrator to give you access.
5. JavaScript may be disabled in your browser. If JavaScript is
disabled, your browser will be unable to connect to the base station.
Note that modern browsers normally have JavaScript enabled by
default.
4.2.6 Finding a Lost or Forgotten IP Address
Use the following procedure if an IP address has been lost or forgotten.
1. Connect your PC to the serial port on the back of the base station.
2. Run a program such as HyperTerminal, Teraterm or minicom.
3. Select the following port settings: 57600 baud, 8 data bits, no parity,
1 stop bit, no flow control.
4. Enter root as a login name, and enter the root password when
requested (the default is k1w1 ).
5. Type ifconfig and press Enter. The IP address is displayed on the
second line returned as “inet addr:xxx.xxx.xxx.xxx”.