background image

 

TB7300 Installation and Operation Manual

General Safety and Regulatory Information

23

© Tait Limited November 2016

2.3

Environmental Conditions

2.3.1

Operating Temperature Range

The operating temperature range of the equipment is –22°F to +140°F 
(–30°C to +60°C) ambient temperature. Ambient temperature is defined as 
the temperature of the air at the intake to the cooling fans.

2.3.2

Humidity

The humidity should not exceed 95% relative humidity through the 
specified operating temperature range.

2.3.3

Dust and Dirt

For uncontrolled environments, the level of airborne particulates must not 
exceed 100µg/m

3

.

2.4

Regulatory Information

2.4.1

Distress Frequencies

The 406 to 406.1MHz frequency range is reserved worldwide for use by 
Distress Beacons. Do 

not

 program transmitters to operate in this frequency 

range.

2.4.2

Compliance Standards

This equipment has been tested and approved to various national and 
international standards. Refer to the latest issue of the Specifications 
Manual for a complete list of these standards.

2.4.3

Unauthorized Modifications

Any modifications you make to this equipment which are not authorized by 
Tait may invalidate your compliance authority’s approval to operate the 
equipment.

The manufacturer is not responsible for any radio or TV interference 
caused by unauthorized modifications to this equipment. Such 
modifications could void the user’s authority to operate the equipment.

Содержание TB7300


























































































Отзывы: