Taiden HCS-5300BAT, Инструкция по установке и эксплуатации

Страница: 92 / 117

5.2.6 S.I. setup
It includes channels, booths and language setting. The interface of S.I. setup is shown in the following figure:
Figure 5.9 S.I. setup

Channels: supports 7 S.I. channels at most. If there are wired conference units connected, the maximal number of
channels is 3;
The system supports 7 S.I. channels, and distributes as well an output language for each channel. To set up the S.I.
channels, the user should first select the number of channels, according to the conference requirement. If there are 3
different languages applied in the conference, the operator shall set the channel number to 3 and click the “OK” button to
confirm. Assign now a specific language for each channel. After completion, click the “Send to CMU” button to save the
settings and to update the conference main unit.

Booth: supports 7 booths at most.
The system supports 7 Interpreter Booths. Each booth should set the outgoing A channel, and whether outgoing B and C
channel is needed. If the outgoing C channel is checked, the outgoing language of B channel should be set. All settings
shall be configured according to the actual conference requirements. When the setup is completed, click the “Send to
CMU” button to save the settings and to update the conference main unit.

Language: languages can be added or deleted conveniently, a maximum of 16 user-defined languages are
supported. However, the languages listed by the system cannot be modified or deleted, as shown in the figure
below:
80