Taiden HCS-5300BAT, Инструкция по установке и эксплуатации

Страница: 60 / 117

A) Conference style seating (circulatory seating)
Within the circulatory seating operating area of the
conference units, the transceivers must be placed evenly.
Make sure that all conference units communicate with at
least two transceivers.
Figure 3.14 Arrangement according to the seating style
(conference style seating)
The following figure shows the position planning for
conference style seating if the conference rooms have
distinct areas.
Figure 3.15 Planning the transceiver (conference style
seating)
B) Parliamentary seating
If the transceivers for parliamentary seating would be
placed evenly as shown in Figure 3.14, transceiver No. 1
could only communicate with the few conference units in
the last row (= left row in Figure 3.16), compared to the
transceiver placed over the front row. The reason is that
the infrared receiving glass is at the frontage of the
conference unit and is orientated to the podium.
Therefore the transceivers are now placed according to
Figure 3.16. Transceiver No. 1 was moved to the right
compared to Figure 3.14. The transceiver in the front row
can effectively enlarge the coverage area.
Figure 3.16 Arrangement according to the seating style
(parliamentary seating)
The following figure shows the position planning for
parliamentary style seating if the conference rooms have
distinct areas.
Figure 3.17 Planning the transceiver (parliamentary
seating)
48