b).
Press the operation knob to save and return to the
upper level menu.
3.6.21 Time Setting
Setup system clock.
a). Rotate the operation knob to go to "Year", "Month",
"Day", "Hour", "Minute" in turn;
b).
Press the knob and then rotate it to set time;
c).
Press the knob to save;
d). Rotate the knob to “Return” and press the knob to
the upper level menu.
3.6.22 Time Display Setting
a). Rotate the operation knob to select “Yes” or “No”;
b). Press the knob to save and return to the upper level
menu.
3.6.23 Unit Numbering
All HCS-4385U/50 interpreter units must be numbered
when the system is used for first time or when adding
or replacing interpreter units.
a). Press the operation knob to enter numbering starts,
the indicating light “B” of all connected interpreter
units will be on and the CMU LCD will display as
follow:
b). Rotate the primary knob on the interpreter unit to
select the number (rang: 1-6), and press key “B” to
confirm;
c). Press the operation knob to stop number and return
to the upper level menu.
3.6.24 Fiber Port Setting
Enable/disable the fiber port.
a). Rotate the operation knob to select “Enable” or
“Disable”;
b).
Press the knob to save and return to the upper level
menu.
3.6.25 Number of Channel
a). Rotate the operation knob to set number of audio
input channel, rang: 0-16;
b).
Press the knob to save and return to the upper level
menu.
3.6.26 Channel Gain Setting
“Input sensitivity” includes following submenus:
•
“All”
: adjust all channels input gain
•
“Per. Input”
: adjust each channel input gain
•
“All”:
Rotate the operation knob to adjust the gain for all
51
Содержание HCS-5100Plus
Страница 1: ...New Generation Digital Infrared Language Distribution System Installation and Operating Manual V 2 4 ...
Страница 30: ...2 5 5 Transmitter menu structure work mode Bypass Figure 2 12e Transmitter menu structure work mode Bypass 19 ...
Страница 52: ...3 5 5 Transmitter menu structure work mode Bypass Figure 3 10e Transmitter menu structure work mode Bypass 41 ...
