“OVERRIDE-BC” mode enables
A/B/C
channel of an interpreter unit in another booth
to override an occupied B/C channel in
another booth, but supplying the same
channel; when an interpreter unit in another
booth to override an occupied A channel in
another booth, the “Microphone ON” indicators
the occupied A channel will flash on the
control panel for about 5 seconds.
2).
Press the operation knob to confirm selected
interlock mode and go to step e).
e). Set interlock mode in a booth
Select interlock mode in a booth, includes:
"INTERLOCK"
"OVERRIDE"
1).
Rotate the operation knob to switch between
interlock modes;
“INTERLOCK” mode prevents that two
interpreter units in a booth engage the same
channel.
“OVERRIDE” mode enables an interpreter
unit to override an occupied channel in the
same booth, but supplying the same channel.
2).
Press the operation knob to confirm selected
interlock mode and go to step f).
f). Set switch outgoing channel When mic. on
Set switch outgoing channel when microphone on for
HCS-8385.
1).
Rotate the operation knob to switch between
“Enable” and “Disable”,
2).
Press the operation knob to confirm and go to
step g)
g). Select language of output channel for the booth
To distribute the interpretation languages separately,
A/B/C channels are provided in each interpretation unit.
The language setting of A/B/C channels for all
interpreter units in one booth is uniform. After the setup
of booth numbers, the user interface to set up output
the channel A/B/C language will be shown for each
booth.
1).
Setup channel A language for booth 1: rotate the
operation knob to select the language from
those languages that have been selected in step
b) and press the knob to confirm;
2).
Select channel C language for booth 1: “None” or
“All”;
If “All” is selected for C then rotate the
operation knob to select the language for B
from those languages that have been selected
in step b) and press the knob to confirm;
If “None” is selected for C then select channel
B language from “None” or “All”;
“None”
stands for no language output from
channel B;
“All”
stands for the language of channel B
which can be any of the selected languages.
Press the operation knob to confirm and go to
configuration for next booth;
49
Содержание HCS-5100Plus
Страница 1: ...New Generation Digital Infrared Language Distribution System Installation and Operating Manual V 2 4 ...
Страница 30: ...2 5 5 Transmitter menu structure work mode Bypass Figure 2 12e Transmitter menu structure work mode Bypass 19 ...
Страница 52: ...3 5 5 Transmitter menu structure work mode Bypass Figure 3 10e Transmitter menu structure work mode Bypass 41 ...
