Taiden HCL-404, Инструкция по установке и эксплуатации

Страница: 34 / 78

26
3.7 Installation
1. Fixed installation for HCL-404J
(unit: mm)
2. Fixed installation for HCL-404+HCL-404J
1) Take out HCL-404 and HCL-404J, place them horizontally on the desktop, and connect the tenon-and-mortise structure as
shown in the figure below.
2) After docking, as shown in the figure below, loosen the screw 1, remove the screw 2, pull out the fixing plate and rotate it to
the 2 position, reinstall the screw 2, and tighten the screws 1 and 2 to complete the assembly of the column loudspeaker.
3) Drive 4 screws at the appropriate height of the wall according to the spacing marked in the figure below, and reserve enough
height at the top;
As shown in the figure on the left, the distance
between the two fixed installation positions on the
back of the HCL-404J column loudspeaker is 298mm,
and the upper installation position is 118mm from the
top. The installation is as follows:
1) Drive two screws at the appropriate height of
the wall at an interval of 298mm, and reserve enough
height at the top;
2) Connect the audio cable;
3) Pull up the column loudspeaker and snap the
screw into the installation positions.