Taiden HCL-404, Инструкция по установке и эксплуатации

Страница: 20 / 78

12
2.7.7.2 Simulation
Current Device:
display the current device information and set the location information for the HCL-804A

X: the horizontal axis position of HCL-804A, such as: a rectangular conference room, HCL-804A is installed on
the front, X can be set to 0; if a conference room contains the podium, HCL-804A is installed on both sides of
the podium, X value needs to be set according to the actual distance;

Z: the installation height of HCL-804A, and the bottom end value is the Z value;

Angle: the pitch angle of HCL-804A, if use standard bracket, set it to 0;

Invert: settings for the upper column when two columns are combined.
Beam simulation: parameters setting for beam simulation

Simulation frequency: selected simulation frequency and the visualization interface showed the beam
characteristics of the selected frequency, default is 1000Hz;

Beam switch: dual beams can be controlled independently, and the factory default is OFF;