Tahoe T../MA-ANJ series, Руководство по установке

Страница: 6 / 24

5
Step 9S – Set Regeneration Time Options using UP or DOWN. If value is set to:
 “DELAYED REGEN” means regeneration will occur at the preset time;
 “IMMEDIATE” means regeneration will occur immediately when the volume capacity
reaches 0 (zero); or
 “DELAY+IMMEDIATE” means regeneration will occur at one of the following:
- The preset time when the volume capacity falls below the reserve or the specified
number of days between regenerations is reached whichever comes first; or
-
Immediately after 10 minutes of no water usage when the volume capacity
reaches 0 (zero).
See Setting Options Table for more detail. Press NEXT to go to Step 10S. Press REGEN
to return to previous step.
Step 10S – Press NEXT until SALT LEVEL MONITOR appears. Set Salt LEVEL
MONITOR using UP or DOWN. If the value is set to:
 “OFF” no low salt level warning will appear for the user.
 A specific value, “ALERT” will flash on the display when the calculated remaining
pounds of salt falls below that level.
Press NEXT to exit Softener System Setup. Press REGEN to return to previous step.
This table is to be used as a guide or shortcut to the settings made in Step 3I, 8S, and 9S. For quick
programming, use the recommended setting shown in row 3.