Tahoe T../MA-ANJ series, Руководство по установке

Страница: 10 / 24

9
Step 5I – Next Regeneration Time (minutes): Set the minutes of day for regeneration
using DOWN or UP. This display will not be shown if “IMMEDIATE” is selected in Set
Regeneration Time Option in Softener System Setup Step 9S. Press NEXT to go to Step
6I. Press REGEN to return to previous step.
Step 6I – Energy Saver operation. When set to OFF, the display backlight is always on.
When set to ON, the display backlight will go off after 5 minutes of no keypad activity. A
valve error or salt level alert will activate the display backlight, and prevent deactivation
until the error or alert is reset by the user. Press NEXT to exit Installer Display Setting.
Press REGEN to return to the previous step.
SET TIME OF DAY
Time of day should only need to be set if the battery has been depleted because of extended power outages
or when daylight saving time begins or ends. If an extended power outage occurs, the time of day will flash
on and off which indicates the time of day should be reset. The non rechargeable battery should also be
replaced.
Step 1U – Press CLOCK.
Step 2U – Current Time (hour): Set the hour of the day using DOWN or UP. AM/PM
toggles after 12. Press NEXT to go to Step 3U.
Step 3U – Current Time (minutes): Set the minutes of the day using DOWN or UP.
Press NEXT to exit Set Time of Day. Press REGEN to return to previous step.