TAGLIAVINI ROTOR RT 68 Скачать руководство пользователя страница 15

Страница: 15 / 124

Pag. 15

For the larger parts' dimensions see technical data table § 4.3

1.8 Furnace decommissioning

1.8.1 Prolonged inactivity

When preparing for oven prolonged inactivity, the energy source must be disconnected.

All oven parts must be wiped clean, lubricated, and protected by a waterproof material shell, so dust, insects,

rodents, etc. are not able to reach the machine.

The protection process must avoid oven damage damaged due to impacts, tampering and various abuse.

The place where the oven is located must be kept dry and protected from atmospheric agents.

Before oven operation is restored a careful preliminary examination of its integrity by specialized personnel

must be carried out.

1.8.2 Oven decommissioning

Oven decommissioning must be conducted by a specialist firm authorized for waste disposal.

The same firm will conduct oven dismantling by separating the materials by their type, and send them to a more

appropriate final destination: recovery or storage in landfill.

Содержание ROTOR RT 68





























































































































Результаты поиска

Содержание ROTOR RT 68

Отзывы:

TAGLIAVINI ROTOR RT 68, Руководство пользователя, Страница: 15 / 124

Результаты поиска

Содержание ROTOR RT 68

Отзывы: