TAGLIAVINI ROTOR RT 68 Скачать руководство пользователя страница 10

Страница: 10 / 124

Pag. 10

Maintenance and use manual

COMBUSTION ROTOR 2018 Ver. 1.1 from 24/06/18

The manufacturer does not guarantee local technical personnel suitability for oven installation and support

services, although, all information regarding the equipment's proper connection is presented in a special

section of this manual.

In this regard, it is advisable that a user appeals to an expert professional technician's advice regarding laws

or local regulations.

The manufacturer reminds the user about his obligation to examine local legislation regarding workplace safety

and health.

IMPORTANT

: oven warranty is closely linked to compliance with all the rules referred to in this

manual.

1.5 Equipment intended use.

IMPORTANT

: the oven is designed exclusively for food cooking, more precisely for bread and

piastre cooking, and must operate in accordance to the manufacturer's instructions.

The oven should be used only for it's intended purpose.

Any other use is considered inappropriate and therefore unreasonable.

The manufacturer cannot be held responsible for any damage caused by erroneous and

inappropriate utilisation, such as:

- oven utilisation for non-alimentary product cooking;

- improper use by untrained personnel;

- modifications or unauthorized intervention;

- serious deficiencies in scheduled maintenance;

- use of non-genuine or different model parts;

- failure to respect the instructions, even partially;

- exceptional events.

WARNING

: inserting alcohol solution in the cooking chamber is dangerous due to the fact that

high temperatures cause alcohol evaporation. This phenomenon may cause an explosion.

For the same reason drying operations are not permitted (e.g. , silicone baking pan drying).

Furthermore, combustible substance insertion in the cooking chamber is forbidden (for

example sugar). These may can create a fire hazard.

ATTENTION

: the oven is not suitable for explosive environments

ATTENTION !

HIS DEVICE MUST BE CONNECTED ACCORDING TO THE REGULATIONS IN FORCE.

IT MUST BE USED AND INSTALLED IN A WELL VENTILATED ENVIRONMENT.

THE INSTRUCTIONS MUST BE ATTIVELY OBSERVED BEFORE INSTALLING AND

SWITCHING ON THE DEVICE .

Содержание ROTOR RT 68





























































































































Результаты поиска

Содержание ROTOR RT 68

Отзывы:

Похожие инструкции для ROTOR RT 68

Бренды по названию

Популярные бренды

TAGLIAVINI ROTOR RT 68, Руководство пользователя

Результаты поиска

Содержание ROTOR RT 68

Отзывы:

Похожие инструкции для ROTOR RT 68

Бренды по названию

Популярные бренды