Taga Harmony PC Series, Инструкция по эксплуатации

Страница: 9 / 12

9
Hooking Up the Conditioner and Operation
2. Make sure the conditioner is turned off (the Power Switch is in the down OFF position and the
Power Cable is removed).
3. Using power cables (only a power cable for the conditioner is supplied with this product)
connect your audio-video equipment to the Power Sockets following the Phase Detection
recommendations.
Follow the below recommendations for connections:
SWITCHED POWER SOCKETS
These sockets are controlled by the Power Switch and are only operating while the Power Switch
is in the 1 (ON) position.
Group I [low-power inductance filtering] of Power Sockets is recommended for digital equipment
[DAC, Music Streamer, Media Player, BT receiver].
Group II [low-power inductance filtering, isolated by the power transformer] of Power Sockets is
recommended for sound sources [CD/DVD/Blu-ray Player, Turntable, Radio Tuner].
Note! Group II is specially designed for sound sources. Do not connect other equipment to the
Power Sockets in this group.
UNSWITCHED POWER SOCKETS
These sockets are not controlled by the Power Switch and are powered whenever the conditioner
is connected to the electrical outlet.
Group III [high-power inductance filtering] of Power Sockets is recommended for preamplifiers /
accessories [Preamplifier, Phono Stage, Headphone Amplifier].
Group IV [high-power inductance filtering] of Power Sockets is recommended for amplifiers
[Power Amplifier, Solid State / Hybrid / Tube Integrated Amplifiers, AV Receiver].